Product ID:EPK IC PART A, EP539A
MSDS Date:10/29/1990
FSC:8030
NIIN:00N052686
Kit Part:Y
MSDS Number: BVMSQ

GEM PRODUCTS INC

12472 EDISON WAY
GARDEN GROVE, CA 92641
US

Emergency Phone: 714-898-2788

Info Phone: 714-898-2788

Cage: 91714

GEM PRODUCTS INC

IRVING, TX 75061-8826 US

Telephone: 714-898-2788

Cage: 91714

EPOXY RESIN SYSTEM

OSHA PEL N/K

ACGIH TLV: N/K

TALC (POWDER) CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: <50%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

<10 G/L ESTIMATE.

RTECS: 9999999VO

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN RASH, IRRITATION. MAY CAUSE SKIN
IRRITATION & POSSIBLE ALLERGIC REACTIONS. PROLONGED & REPEATED
CONTACT MAY CAUSE SENSITIZATION WHICH WILL RESULT IN ALLERGIC
REACTIONS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:SKIN: FLUSH WITH PLENTY OF WATER. WASH SKIN THOROUGHLY WITH
SOAP & WATER, RUBBING ALCOHOL OR HAND CLEANER. DO NOT USE SOLVENTS.
EYES: FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
INHAL: RE MOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP). INGEST: CALL MD IMMEDIATELY .

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM OR FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASSES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROT CLTHG, GLOVES & SAFETY GLASSES.
COVER W/ABSORBENT MATERIAL; THEN SCRAPE UP & TRANSFER TO METAL
CONTAINER. WIPE UP REMAINING RESIDUE WITH SOLVENTS. OBSERVING
SOLVENT FLAMMABILITY CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMP (77F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT REQUIRED WITH GOOD INDUSTRIAL VENTILATION.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:AS NEEDED TO PROTECT SKIN & CLOTHING.
Work Hygienic Practices:REMOVE SOILED CLOTHING AND WASH BEFORE REUSE.
Supplemental Safety and Health
POLYMERIZATION(CNDTNS TO AVOID): FAILURE TO OBSERVE CAUTIONS MAY RESULT
IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC GASSES.

Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01
Vapor Density:NIL
Spec Gravity:>1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:WHITE, HIGH VISCOSITY LIQUID, VERY SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL & DO NOT HEAT MATL UNLESS CURING SURFS TO BE
BONDED.(SUPP DATA)

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE IN ACCORDANCE WITH
LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.